Wednesday 29 October 2008

New Category added to website - Local to us in Essex



We have recently added a new category to our website titled ‘Local to us in Essex’. Here you will find various images taken local to us around Essex, Suffolk & Norfolk. All photos were taken by our in house photographer & locations include Colchester, Wivenhoe, Mersey Island & the river Colne.
One of our most popular is the print of Colchester Castle in the evening sun light.
All these images are available in either rectangular or square prints & are available in many different sizes.

We will be updating this category on a regular basis if we can persuede our in house photographer to venture out into the cold now we are heading into winter !!


Please click the link below to visit the Local to us in Essex Category:




Monday 27 October 2008

Canvas Concerns - Storing and Delivery

www.choosecanvas.com

http://www.choosecanvas.com/index.php?main_page=product_info&cPath=7&products_id=173


What is the best way to store unprimed canvas? Or primed canvas? How should one store stretched canvas? What is the best way to ship a stretched canvas? How does one preserve and store canvas that has been removed from its stretcher bars? In order to protect this important and essential art material, as well as your finished paintings, read on.



Canvas is a very strong material. Usually made of all cotton, cotton and linen, or linen, it can be woven in any texture from smooth to nubby. Newer synthetic fibers have been introduced as well, and these add strength of a different sort to the basic natural fiber content. Synthetic fibers resist rot and decay far more readily than natural cotton or linen. This quality makes synthetic “canvas” a good candidate for exterior display.



Cotton, linen or synthetic canvas can be purchased either primed (usually with a high quality acrylic primer) or unprimed. Artists who have developed their own formula for underpainting ground or who do not want the surface sealed use the unprimed surface. Many acrylic painters love the near watercolor effects of using unprimed canvas. Both primed and unprimed canvas should be stored away from strong direct light or exposure to moisture. Light will destroy canvas just as it does any form of fabric. Primed is slightly less susceptible to light damage, but UV contact should be limited whenever possible, whether primed or unprimed. Ideally, canvas should be rolled around a firm center and covered to protect the roll from dirt and grime (and UV).



Stretched canvas should be stored standing upright along one edge. Multiples should be stored in such a way as to prevent abrasion of the next canvas. One way to accomplish this is to stack the first two back-to-back, in pairs. Then fronts contact only fronts and backs contact only backs. Standing in some sort of rack can best facilitate this. Storing one on top of the other in a stack will promote warping of the stretcher bars and also creates a situation where objects could fall onto a painting and cause damage or possible rips.



Delivering a stretched canvas requires one of several options to be exercised. First and most chosen is the procedure of wrapping the (dry) painting in soft foam sheeting and then packing in a heavy cardboard carton. Delivery/storage companies offer several choices in heavy corrugated boxes. Choose one that is at least 6″ larger on all sides than the painting (including the thickness of the art). Fill all areas around the painting with foam sheets, making sure there is no room for the painting to slip or move during transport.



Crates can be built (either by you or a freight company) for Delivering ornate, oversized, or extremely valuable artworks. These crates resemble what you might expect a giant piece of heavy machinery to be shipped in. The sheer size and proportions of the crate make it an expensive option, but one that might be necessary for some works.



Paintings purchased at times when crating is impractical (such as when traveling), can be removed from their stretcher bars for Delivering. This makes the size (and the cost) smaller and more manageable. To remove the tacks or staples from the stretcher bars, use a sharp instrument such as the tine of a screwdriver or a pocketknife and a pair of pliers. Gently lift the tack or staple up, and then grip it with pliers. Remove all tacks or staples. Cover the painting with a soft cloth or smooth paper and carefully roll the painting to fit a large, heavy mailing tube. Avoid rolling too tightly. Pad each end of the tube so that the edges will be protected from crushing. It is sometimes possible to reuse the stretcher bars, so they might be collapsed and shipped with the canvas. Ship stretcher bars in a separate package or tube, as they could cause creasing or other damage if shipped inside the tube with the painting.



Rolled, painted canvases should be unrolled and re-stretched as soon as possible. The simple act of rolling a painting, even though the surface is somewhat flexible, could cause cracking or other damage; and the longer it stays rolled, the more likely damage is to occur. If you are unsure how to re-stretch the canvas (and there is a special technique to stretching) consult a professional framer who will be able to re-stretch the work for a nominal fee.



Proper storage of artworks, especially stretched canvases, is vital to their long life. If stretched canvases are exposed to prolonged periods of high humidity (such as a warehouse or garage storage facility that is not air conditioned), severe warping of the stretchers can occur. That is the most immediate and obvious damage. Humidity creeps into the painting and penetrates between the painted surface and the canvas onto which it is painted. Cracks and crazing are the end result. When examined closely, these cracks (caused by excessive humidity) go all the way through the painting, right to the canvas core. It may take many months for the extent of the damage to become visible, but by that time the damage is already done. Correction can be made by a conservator, but at a very high cost.



As you can see, by taking just a few simple precautions in the storage and shipment of canvases, you can save yourself lots of time, disappointment and money.





Tuesday 21 October 2008

Choose Canvas - How to Stretch Canvas








Stretching your own canvas is fairly easy once you know the procedure and have the proper tools and materials. Note that the canvas referred to below is pre-primed; but you could also use the following procedure with raw canvas and, after it has been stretched, prime it with two coats of acrylic gesso. Please read through all of the instructions first, since certain steps must be prepared for in advance.



First you will need to gather a few tools and materials: canvas pliers, stapler/staples or hammer and tacks, stretcher strips, and canvas. In addition, a T-square is convenient to help you insure that the stretchers are square. Then follow these steps to stretch your canvas:

Select the appropriate-sized stretchers for the canvas you want to build. Your art supply store has a variety of pre-cut wooden frame rails (or stretcher bars) that have interlocking mitered edges.
Once your stretcher frame is assembled on a flat surface, you should verify that it is square. Do this by taking a tape measure and checking that the diagonal distances from both opposing corners are equidistant. (They almost always will be.) If you encounter an offset, you can correct it by attaching a small metal right-angle brace on the inner frame corner. A small plywood right-angle triangle attached to the rear frame corner will also help correct any shift.



For frame rails longer than 36 inches, an interior brace should be inserted between these rails to support them from bowing inward after the canvas has been attached. This will also protect against frame distortion during periods of fluctuating humidity. If this type of support rail did not already come with your pre-cut frame, you should cut a piece of similar wood and attach it with the type of braces detailed in step 2.



Take the canvas and lay the primed side down on a clean, flat surface. Place the frame atop the canvas and then cut away any excess material so that there are two inches of excess canvas bordering the frame on all sides. It is important that you leave this border material because this is what you will use to grip, stretch, and attach the canvas to the frame.
Fold one side of the canvas over one of the shorter frame rails and then attach a canvas tack at the center of the outside edge of that rail.



At the opposite side, use canvas pliers (which are similar to regular pliers except they have a broader gripping area) to grip the canvas at mid-rail. It may be helpful for you to set the frame upright while doing this. With a firm grip, pull the canvas until a straight crease is formed to the tacked end. While keeping tension on the canvas, insert another tack at the center edge of the rail, just like the other side. Note that you may also use a staple gun/staples instead of tacks. (The Arrow JT-21 is easy to use.)



Move to the next frame rail (one of the longer ones) and repeat steps 5 and 6. As you do, you will notice a triangular canvas crease as you attach the third side and then a diamond-shaped crease when the fourth tack is attached on the remaining mid-rail.



Now, place temporary tacks at all four corners. Starting with the center of one of the long rails, grip the canvas tightly with the pliers and fasten tacks at 2″ intervals. Repeat with several tacks in both directions (from center) and then switch to the opposite side and repeat this process. Continue working from the center until both long sides are completely tacked down to all but one inch from each corner, stretching the canvas evenly as you proceed.



Once both long sides are finished, remove the temporary tacks that you fastened in step 8. Now repeat the same fastening process for both of the short sides, working out from the centers. For smaller canvases, one entire short side can be fastened first, followed by the opposite side. Larger canvases should be rotated several times to evenly stretch the material over the frame. Note that a primed linen canvas (oil-primed linen, in particular) will normally require that the tacks be placed closer together, due to the limited stretch of this material.



Fold and pleat the corners of the canvas and then neatly wrap them around to the rear of the canvas frame. Keeping tension on the material, tack all of the excess cloth to the rear of the frame so that it is neatly secured. Then place tacks on all four outer corners. This excess material is important to have in case you ever need to restretch or remount the canvas.
Any remaining canvas indentations or ripples can be reduced by moistening the affected area with a damp sponge. Be careful not to saturate, and allow the canvas to dry completely in a well-ventilated area.



Keep in mind that it is easier to stretch primed cotton and Polyflax canvas than it is to mount a primed linen canvas, since linen fibers do not stretch as much. Oil-primed canvas requires the most attention when mounting on a frame because it has virtually no stretch. When working with this type of canvas, you may have to remove tacks in wrinkled sections and then restretch and retack.



By following the above steps and using proper materials and a few tools, you can easily build your own canvas. With a little practice, the process becomes much faster and easier, almost to the point of becoming routine.